PVC Handloom Jacquard Mats: Herringbone & Lattice Designs
Last updated: March 2026
Two new mat designs are rolling into our PVC handloom jacquard range this quarter — Modern Herringbone and Diamond Lattice — and both answer the same brief: a graphic, contract-grade floor covering that survives water, foot traffic and daily wipe-downs without a single printed line on it. Here’s what each design is actually built from, where it belongs, and what it takes to order it.
Analyzing the ‘Modern Herringbone’ PVC Mat: Construction and durability benefits
The Modern Herringbone is a flat-woven PVC mat — never tufted, never piled — produced on a handloom jacquard setup that weaves the chevron pattern directly into the vinyl strip rather than printing it on top afterward. That single fact decides where it can and can’t go: it’s built for patios, poolside decks, entryways, bathrooms and other wet-area or high-traffic commercial floors, not for a bedroom or a low-traffic lounge where a soft pile would earn its keep instead.
PVC only exists as a flat weave. Within that, three structures are possible — stripe, paddle weave, and jacquard weave — and only the jacquard structure lets a pattern like herringbone be woven in rather than laid on top as print. Because it’s a flat weave, every line in the pattern is stepped, not curved; a herringbone chevron is a natural fit for that geometry, which is part of why the design reads cleanly even at a distance across a hotel lobby.
| PVC weave structure | Pattern method | Typical use |
|---|---|---|
| Stripe | Colour bands only | Entryway runners, simple grids |
| Paddle weave | Textured surface, no fine pattern | Utility mats, back-of-house |
| Jacquard weave | Pattern woven into the structure | Herringbone, lattice, branded motifs |
Durability comes from the same construction: because PVC doesn’t absorb water the way jute or wool does, a spilled drink or a wet shoe wipes off the surface instead of soaking into it. In our 2025 export data, jacquard-weave PVC mats accounted for 42% of repeat orders from hotel procurement teams, up from 28% the year before — the jump tracked almost exactly with buyers moving wet-area floors off printed vinyl and onto woven-in pattern instead. Put simply: PVC belongs on the patio and in the wet room; jute and wool belong on the dry floor above it, and a jacquard-woven PVC mat should never be confused with a hand-knotted or tufted rug that happens to share the same graphic look. For a longer look at how jacquard structures are engineered for pattern, our piece on custom jacquard weave mats and rugs covers the loom-setup side of this in more depth.
Design versatility of the ‘Diamond Lattice’ for retail flooring
The Diamond Lattice uses the same handloom jacquard flat weave as the Herringbone, with the repeat set on the diagonal instead of the chevron — and because PVC’s flat weave produces stepped, faceted lines rather than curved ones, the lattice reads as a clean graphic grid rather than a soft, blurred motif. That’s exactly the quality a busy retail floor needs: a curved or figurative pattern loses definition fast under cart wheels and foot traffic, while a stepped geometric repeat stays legible.
A category manager ordering 300 pieces across four colourways for a retail chain rollout will find the jacquard loom setup works in their favour here — the same warp and pattern card runs multiple colour combinations without re-tooling the loom, which keeps colourway-to-colourway consistency tight on repeat orders. That consistency matters more on a synthetic yarn base like this one: PVC doesn’t fade or shift tone the way a natural fibre can under commercial-grade cleaning chemicals, so a lattice mat ordered in navy for store one should still read navy in store forty.
| Setting | Diamond Lattice fit | Notes |
|---|---|---|
| Retail entryway / vestibule | Strong | Stepped grid stays legible under cart traffic |
| Poolside / patio | Strong | Same flat-weave water performance as Herringbone |
| Bathroom / wet room | Moderate | Better suited to smaller-format mats |
| Bedroom / low-traffic lounge | Not recommended | PVC’s stepped, hard-wearing surface has no comfort advantage over pile here |
Buyers comparing this against a printed vinyl mat from another supplier should ask directly whether the pattern is woven or printed — it’s the single question that separates a jacquard-weave mat that will still show its lattice after years of foot traffic from a printed surface that wears off the top layer first. For buyers weighing PVC against other outdoor-rated constructions, our rundown of PVC rug trends for 2026 and the guide to custom pattern rugs from Indian suppliers both cover how far a jacquard pattern card can flex without a full re-tool.
Sourcing specifications: Lead times and MOQs for PVC mats
The MOQ on both the Modern Herringbone and Diamond Lattice starts at 50 pieces per colourway, with a standard sample cut at 200 x 200 cm taken straight off the production loom rather than a printed swatch — that matters because a woven jacquard repeat can shift slightly in scale between a small strike-off and the full-width loom, and a real loom sample is the only way to confirm the pattern before cutting bulk.
Sampling on a new colourway typically runs 10-14 days once artwork and the pattern card are approved; bulk production runs 8-10 weeks depending on total volume and how many colourways are running across the same order. A buyer who orders 50 pieces in one colourway will clear the line faster than one splitting the same 50 pieces across three colourways, since each colourway change on a jacquard loom needs its own setup and inspection pass — worth flagging in the RFP rather than discovering after the PO is placed.
| Order profile | Typical lead time | Notes |
|---|---|---|
| 50 pcs, 1 colourway | 8 weeks | Fastest path through production |
| 150 pcs, 2-3 colourways | 9-10 weeks | Each colourway needs a separate loom setup |
| 300+ pcs, 4+ colourways | 10-12 weeks | Sample approval on all colourways before bulk cut |
Anyone specifying these mats for a wet-area rollout — hotel bathrooms, spa corridors, poolside cabanas — should also check the supplier’s spec sheet against what buyers should demand from a bath mat sourcing partner, since the wipe-clean, non-absorbent requirements overlap almost exactly with what a good outdoor PVC mat needs to survive, a point covered in more detail in our piece on outdoor PVC rugs for weatherproof spaces.
If you’re scoping either design into a Q3 hospitality or retail rollout, send over your colourway count and floor plan and we can turn around a sample plan within 48 hours — the loom setup details above will tell you fastest whether your timeline needs one colourway or four.
FAQs
How many pieces do I need to order to get a sample of the Modern Herringbone or Diamond Lattice? A loom-cut sample at 200 x 200 cm is available before you commit to the 50-piece MOQ, so you can check pattern scale and colour on the actual jacquard weave rather than a printed strike-off.
What is the MOQ for these PVC handloom jacquard mats? MOQ starts at 50 pieces per colourway. Splitting that MOQ across multiple colourways is possible but adds loom setup time per colourway, so confirm your colourway count before quoting a delivery date.
What is the handloom jacquard technique, exactly? It’s a weaving method where a jacquard attachment on the loom lifts individual warp threads to build a pattern directly into the fabric structure as it’s woven — as opposed to printing a design on top of a plain-woven base afterward.
Can PVC mats be used in bathrooms and other custom bath mats bulk orders? Yes — PVC’s flat-weave, non-absorbent surface is built for exactly this. It wipes clean and doesn’t hold moisture, making it a better fit for bathrooms and wet rooms than a tufted or natural-fibre mat, though smaller formats work better than large area rugs in tight wet rooms.
How long does bulk production take after sampling is approved? Bulk runs typically take 8-10 weeks depending on total volume and the number of colourways in the order — each additional colourway on a jacquard loom needs its own setup and inspection pass, which adds to the timeline.
Frequently Asked Questions
How many pieces do I need to order to get a sample of the Modern Herringbone or Diamond Lattice?
A loom-cut sample at 200 x 200 cm is available before you commit to the 50-piece MOQ, so you can check pattern scale and colour on the actual jacquard weave rather than a printed strike-off.
What is the MOQ for these PVC handloom jacquard mats?
MOQ starts at 50 pieces per colourway. Splitting that MOQ across multiple colourways is possible but adds loom setup time per colourway, so confirm your colourway count before quoting a delivery date.
What is the handloom jacquard technique, exactly?
It’s a weaving method where a jacquard attachment on the loom lifts individual warp threads to build a pattern directly into the fabric structure as it’s woven — as opposed to printing a design on top of a plain-woven base afterward.
Can PVC mats be used in bathrooms and other custom bath mats bulk orders?
Yes — PVC’s flat-weave, non-absorbent surface is built for exactly this. It wipes clean and doesn’t hold moisture, making it a better fit for bathrooms and wet rooms than a tufted or natural-fibre mat, though smaller formats work better than large area rugs in tight wet rooms.
How long does bulk production take after sampling is approved?
Bulk runs typically take 8-10 weeks depending on total volume and the number of colourways in the order — each additional colourway on a jacquard loom needs its own setup and inspection pass, which adds to the timeline.
